greek english russian serbian romanian
Banner for Espa

Cultivators

Cultivators

chisel plough , seedbed cultivator for sale,seedbed cultivator in italianoΤhis category includes all kinds of sowing cultivators such as:

> Ripers, harrows some type of sowing cultivators with different teeth combinations with or without rear rollers.

> The working width at these cultivators can be from 2.50 - 7,00m.

> The models over 4m working width are hydraulically folded for safer transport.

> The machines in this category are suitable for crushing the soil and help at the soil preparation before seeding.

> Depending on the region and working conditions you can select the appropriate springs, the appropriate knives and the addition or not of a rear roller.

 

 

 

 

 

 


chisel plough

 

 

 

 

 

 

 

 

ΚΡ cylinders

In the standard version all Kariotakis cultivators have mechanically adjusted rollers, where you adjust by hand a tensioner to set the working depth of the rear cylinders but also is given the possibility to the operator to regulate the angle of the discs by a tensioner also.

chisel plough

BAR-ROL cylinders

The BAR-ROL rear cylinder should be used on medium and dry conditions, where the cylinder is provided with tubular bars and has diameter 580mm and 11 tubular bars. The large diameter of the BAR-ROL and the hydraulic setting gives the advantage to the machine to be able to work quickly, without interruption and without problems from the adhesion of the soil to the cylinder during work.

chisel plough

 

 

 

 

 

 

 

 

CUT cylinders

It has a diameter 420 mm

It has such a geometric design and proper tooth arrangement, ideal distance between the two cylinders that allow the machine to achieve the ideal treatment of the soil after deep plowing of the subsoil.
The working depth of the CUT cylinders can be adjusted.
There is also the possibility of adjusting the working angle of the cylinders and it is adjusted mechanically (standard).
The CUT cylinder can be adapted to all types of subsoil.



There are many types of spring in different dimensions and thickness that can be combined as the customer wishes.


chisel plough

 

 

 

Safety transport

Models over 4,0m working width folded in the middle hydraulically for most safe and easy transport.

  1. So unaccompanied the Cultivators can be safely transferred as the carriage width of the folding machine is not exceeding the 3,00m

 

 

 

 

 

 

Τhree points connection with the tractor

► Ability to choose the type of the spring or the type of the knife

 Mechanically adjustment of the rear cylinder depth

► Ability to choose rear cylinder

 Main body from frame steel 

 Models more than 4,00m have are replicated hydraulically for safety and easy transport

 

 

P200

 

P250

 

P300

 

P350

 

P400

Working width (m)

2,00

 

2,50

 

3,00

 

3,50

 

4,00

Tractor HP

70/80

 

90/110

 

130/150

 

150/180

 

150/180

Transportation width (m)

2,00

 

2,50

 

3,00

 

3,50

 

4,00

Springs and

spring combinations

 

 

 

 

 

Accessories

Rear cylinder  

BAR-ROL Ø580 mm

 

 

 

 

 

 

 

PA400

 

PA500

 

PA600

 

PA700

Working width (m)

4,00

 

5,00

 

6,00

 

7,00

Tractor HP

150/180

 

160/200

 

170/220

 

180/250

Transportation width (m)

3,00

 

3,00

 

3,00

 

3,00

Springs and

spring combinations

 

 

 

 

Accessories

Rear cylinder  

BAR-ROL Ø580 mm

 

 

 


 

 

 

▼ Reinforced main frame

The main frame of Kariotakis cultivators is:

  1.  It is made entirely from frame steel
  2.  It has four rows of frame steel upon which springs are adapted
  3. The pull at the cultivator has been designed to can be adapted to all types of tractors with three-point connection, shifting the center of gravity of the machine near to the tractor and achieving lifting the machine so that it is perfectly safe for transport.

ΚΡ cylinders

In the standard version all Kariotakis cultivators have mechanically adjusted rollers, where you adjust by hand a tensioner to set the working depth of the rear cylinders but also is given the possibility to the operator to regulate the angle of the discs by a tensioner also.

 

BAR-ROL cylinders

The BAR-ROL rear cylinder should be used on medium and dry conditions, where the cylinder is provided with tubular bars and has diameter 580mm and 11 tubular bars. The large diameter of the BAR-ROL and the hydraulic setting gives the advantage to the machine to be able to work quickly, without interruption and without problems from the adhesion of the soil to the cylinder during work.

CUT cylinders

The CUT cylinder:

  1. It has a diameter 420 mm
  2. It has such a geometric design and proper tooth arrangement, ideal distance between the two cylinders that allow the machine to achieve the ideal treatment of the soil after deep plowing of the subsoil.
  3. The working depth of the CUT cylinders can be adjusted.
  4. There is also the possibility of adjusting the working angle of the cylinders and it is adjusted mechanically (standard).
  5. The CUT cylinder can be adapted to all types of subsoil.

*** There is posibility in all types of cylinders the adjustment to be done hydraulically.

 

      

 

There are many types of spring in different dimensions and thickness that can be combined as the customer wishes.

▼ Safety transport

Models over 4,0m working width folded in the middle hydraulically for most safe and easy transport.

  1. So unaccompanied the Cultivators can be safely transferred as the carriage width of the folding machine is not exceeding the 3,00m