New MASTER LO model available from 4 - 6 plows with ON-LAND system for plowing IN FURROW and ON-LAND suitable for tractors up to 350HP.
The same plow, depending on the soil conditions, has an easy system for converting plowing IN FURROW and ON-LAND.
Converting plowing from IN FURROW to ON-LAND is done easily, simply and safely, giving the operator the advantage of having full control of the plow from the cabin of his tractor.
Ideal plowing even in dry conditions because furrow plowing is recommended in wet, slippery conditions.
In other difficult dry conditions, the ON-LAND system is an excellent alternative. It essentially has multiple economic and agronomic benefits.
Correct adjustment of the plough is essential to minimize wear on important parts of the plough and to reduce fuel consumption.
QuickSet can be used to adjust the 1st furrow, independently of the main body of the plough, simply and quickly. Therefore, QuickSet helps you save time and money by aligning the plough and improving the tractor's pulling power.
QuickSet adjustment can be done Hydraulically or Mechanically.
With the ON-LAND system you reduce soil compaction as you can plow with wider tires without having an increased risk of friction
and tire damage, you improve the soil profile in difficult working conditions especially in heavy soils as you have a uniform weight and pressure distribution.
Essential for tractors with wide tires 710mm, 800mm or larger.
GPS systems make plowing in dry periods easier and allow for easy plowing with
precise furrow alignment, thus saving time and reducing plowing costs.
MASTER LO is available from 4 to 6 furrows with a main frame 240X160mm double reinforced with two hollow beams 160X160X10mm and 120X80X8.
For perfect quality plowing in difficult conditions from high strength steels and special heat treatments to ensure trouble-free working conditions and with the highest value.
Equipped with the VARIO system for easy adjustment of the working width Hydraulically and Automatically,
improving the working conditions and fuel consumption of the tractor and adapting the plow to all working conditions (standard)
The unique Memory ISO system that enables the operator to adjust all plow functions via the tractor computer and maintain the desired furrow and working width settings after the plow is turned (standard)
Safe plow transport system with a transport wheel with the system
Transport Wheel 7515M
where the same wheel is also a working wheel with Hydraulic plow working depth adjustment (standard)
equipped with an additional shock absorption system for smoother and easier
adjustment of the plow to the desired working depth.
The robust rotation axis is built to withstand heavy-duty impacts and constant loads.
The bearing that connects the frame plates to the strut base is close to the central frame of the MASTER LO.
As a result, it has reduced loads and maximum rigidity.
All rings are self-lubricating, the retaining pin is heat-treated high-strength steel with the possibility of lubrication.
The 40mm diameter bearing support pin is equipped with self-lubricating bushes which are supported by an intermediate bearing and thus connect the main frame of the MASTER LO with the support plates of the arms
The frame plates that support the base of the MASTER LO uprights are made of special high-strength steel and are held to the central frame with 4 screws.
• This ensures great stability, high strength and minimal friction points.
