Code: MASTER
Husky construction!
For even greater durability and service life in all MASTER ploughs the central frame is double:
● Central main beam 150X100X10
● Second beam 120X80X8
Heavy load resistance...
With the husked pivot axis, Kariotakis plows withstand high impacts and permanent loads.
The pivot shaft is made of strong metals to withstand heavy loads.
Plowing safely...
With the safety screw:
● Safe plowing is achieved with fewer problems.
● The safety screw cuts into extremely hazardous loads releasing the lashing and eliminating any problems with the main body of the plough.
Proper plowing...
By setting the first pivot you succeed
● Easier and better centering of the plough
● Less wear and tear
● Fuel saving
Easy adjustment of the working width...
In MASTER plows, the working width is adjusted hydraulically.
● You achieve the desired working width smoothly, easily and thus adapting the plow to the respective conditions becomes even easier.
● When transporting the plow, its width is minimized for even greater transport safety.
● The Soft Close system acts as a memory as it keeps the working width of the plow constant at the initial setting before turning.
● All adjustments are made easily from the tractor cab.
● The Soft Close system is suitable for 5-shares plows with hydraulically adjustable working width and if they work with more than 14'' inches / 36 cm.
The rear rubber wheel on reversible plows is used to adjust the working depth of the plow while helping it to have a stable path and is standard.
Transport & working wheel
The transport wheel on reversible plows is used to adjust the working depth of the plow while helping it to have a steady path.
Mouldboard Selection & Various Accessories
Depending on the working conditions, you can also choose the M12 or K28 or K30 mouldboard and a verious range of accessories.
► Link attachment three points with the tractor
► Hydraulic cylinder double acting for rotation
► Main frame from double steel frame 150Χ100Χ10+120Χ80Χ8
► Possibility of construction with arm extension 3, 3+1,4,4+1
► Adjusting the first furrow share
► Splitted mouldboard Μ12
► Share with Reversible point
► Hydraulic adjustment of the working width
► Distance between furrows 95cm or 102cm
► Underframe clearance 76cm or 81cm
► Rotation axis for 3 shares Ø130mm, for 4 shares Ø 170mm, for 5 shares Ø 170mm
► Safety bolt
► Elastic wheel